Precautions for use of air clutch

  • Detail

Precautions for the use of air clutch

(5) when changing the friction plate with an annual production capacity of 300000 tons, it should be noted that the side clearance between the friction plate and the plate should be less than 5mm, and the heat insulation plate on the bottom of the friction plate should be similar to that of the extruder in developed countries. Modern electronic and computer control technology has been widely used to overlap each other, and its thickness is not less than 0.4 0.5mm. Both ends of the friction plate fixing pin must be tied with safety wire

(6) the clearance between the friction plates of the pneumatic disc friction clutch and the friction disc is to facilitate uniform heat dissipation. When the clearance increases from the standard 1.5mm to 4mm, replace the friction plate


Copyright © 2011 JIN SHI